Contact us!
phone+49 (0) 4402 86 32 - 0
emailinfo@jutec.com

Certified safety

Work Protection is understood to be measures for protecting the employees against work-related safety and health hazards. The objective is accident prevention and the greatest possible protection of the employee. The most important protective measure is the certified Personal Protective Equipment (PPE) from JUTEC.

THE CE MARKING

is a marking according to EU law for certain products in the context of product safety. By applying the CE marking, manufacturers confirm that their products comply with the applicable European directives.

THE CAT MARKING

Like other personal protective equipment, protective gloves are grouped in three categories according to the European Directive for Personal Protective Equipment (89/686/EEC).

EC DECLARATION OF CONFORMITY

With the EC declaration of conformity, the manufacturer confirms that a product placed on the market complies with the fundamental health and safety requirements of all relevant European directives. The EC declaration of conformity is the basis for the CE marking of the corresponding product.

EC TYPE EXAMINATION CERTIFICATE

This certificate proves that a prototype satisfies the relevant provisions of the directive (currently 89/686/EEC; Personal Protective Equipment).

 

Attention: A fabric certification is no substitute for an EC type examination certificate! A complete
certification requires both certificates.

MANUFACTURER'S INFORMATION

The manufacturer's information on the PPE must be made available to the user in his/her national language in writing or via a download.

The following data are required:

    • Name and complete address of the manufacturer or its authorized representative.

    • Product marking

    • Information on the available sizes

    • Reference to the relevant European Standard Pictographs which specify the hazard class

    • Cleaning instructions

PRODUCT MARKINGS

According to the PPE Directive 89/686/EEC, the label of "Category III products" must provide the following contents and information!

Attention: A fabric certification is no substitute for an EC type examination certificate! A complete
certification requires both certificates.

MANUFACTURER'S INFORMATION

The manufacturer's information on the PPE must be made available to the user in his/her national language in writing or via a download.

The following data are required:

    • Name and complete address of the manufacturer or its authorized representative.

    • Product marking

    • Information on the available sizes

    • Reference to the relevant European Standard Pictographs which specify the hazard class

    • Cleaning instructions

PRODUCT MARKINGS

According to the PPE Directive 89/686/EEC, the label of "Category III products" must provide the following contents and information!

 

By cooperating with reputable certification agencies, we offer you and your employees the safety required by the respective employer's liability insurance association. You are not only provided with certificates and type examination certificates, but also with checklists and evaluations for the:

  • Workplace analysis

  • Hazard analysis

  • Test reports

  • Needs assessment